All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
KOA100
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA100
KOA080
8mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA080
KOA070
7mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA070
KOA060
6mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA060
KOA090
9mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA090
KOA110
11mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA110
KOA120
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA120
KOA140
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA140
KOA160
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA160
KOA180
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA180
KOA200
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA200
KOA130
13mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA130
KOA220
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA220
KOA240
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA240
KOA260
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA260
KOA150
15mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmHex Recess Width: 1.5mmThread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA150